First, let me say that I started off attempting to dupe 6 CDs that a friend
made using "professional level" buring eqpt.
The CDs play OK in my computer players, although they don't sound great.
When I call up E drive to read the disc content, it simply tells me x
(average is 21) number of cda tracks. Each is shown as being 2kb. Don't
know why they're all a uniform 2 kb, but they are.
When I went to burn dupes using Nero, I got an overburn prediction notice.
I opted to go ahead and overburn. Doing this ended up with a failed burn on
one disc, and a success on another. I didn't try a 3rd, because I made 4
nice coasters out of the failed tries.
So, when I couldn't do a disc-to-disc copy, I then tried copying the files
to hard drive. The idea being to then use the .cda tracks as sources to put
on a NERO playlist and make CD copies from it. Here's the brick wall I ran
into there:
"Sorry-NERO cannot determine the SCSI/ATAPI device that corresponds to this
drive letter.
Reasons for this may be:
reading .cda from a recorder which is not supported.
the source drive does not support CDDA reading.
the source frive reads CDDA too slowly.
the NERO driver is not installed or is not working
properly. "
CDEX doesn't do anything for me in regard to ripping these CDs. I try to
start it, but it simply doesn't respond.
So, what next?
|
|