dang, who got it working ??
WIN 32 or 64 bit only ; Virus Program usually must be
disabled to patch automatically or to patch manually.
---Luhe virus is in keygen; might be mild might be fun ; don't know
yet.
Image all disk drives and run all protection software you got and
more.
You might need 7 TB internal and 6 TB external to handle
the fun stuff that comes in various crackerJACK boxes.
also HAVE A CIGAR . . . and a couple of
drinks ..
///////// One instruction set says this :
0.Remove previous cracks.
1.Install and update Omnisphere 2.
2.Run our keygen.
3.Patch plugins.
4.Run Omnisphere 2 and start activation.
5.Copy "Challenge Code" to the keygen.
6.Generate license and activate.
7.Enjoy!
--------------------------I DID NOT do STEP 2 above--- I DID
----------------------------Step 2 below.
///////// A different instruction set says this :
For Windows users who have problem to patch the DLLs.
This archive contains pre-patched VST dll files (Omni2.0.3d). Patched
using R2R tool.
1. Install Omnisphere 2 (8 DVDs)
2. Replace installed .dll files with patched DLLs from downloaded
archive.
3. Use R2R Keygen to authorize the plugin from your VST DAW
(challenge/response).
4. Close your DAW, then run it again.
//// This instruction second set is from
///// ssos_v2.0.3d.windows.patched.vst.only.rar
////// This RAR contains patched 32bit and patched 64bit DDLs.
-------- How I made it work----
1) copied patched DLLs to the correct locations for VSTi operation
THE "patch function" in the KEYGEN was NOT used at ALL!!!
---------------THE "patch function" in the KEYGEN was NOT used at
ALL!!!
Do not know what that patch function does, but it seemed better just
to
copy the included pacthed DDLs to the appropriate locations. The
appropriate location is your VSTi 32 and 64 bit directories of choice
as per
assigned in the DAW.
2) STart the Keygen
3) Start up the DAW and open any template and load up the VSTi OMNI
32bit or 64 bit, whatever one is desired
4) The DAW will try to load OMNI but an activation screen will appear
5) Copy single line challenge code from DAW activation screen to the
KEYGEN
screen
6) Hit generate on Keygen and a HUGE multi-lined activation number
will appear
---about 200 or 300 complex characters. If you copy this huge code
back into the
DAW screen by dragging mouse over it, hit copy, then hit PASTE in DAW
activation
screen, it will not work !!! WHY ?????????
BECAUSE the activation code is even LARGER than what appears on the
screen.
---------BECAUSE the activation code is even LARGER than what appears
on the screen initially ( very important).
----To properly copy the huge activation number, you MUST drag your
mouse to
include all characters on the screen and a few more out of sight.
These additional
characters can be seen when the COPY MOUSE function is dragged to the
BOTTOM of the
screen and then on FURTHER DOWN !!
7) Once the HUGE activation code is fully and properly selection by
dragging
mouse past the bottom of screen , hit PASTE on DAW activation
screen to make it accept
what has been highlighted by DROP and DRAG MOUSE COPY function
8) Boom done. Close DAW and re-open. Start up OMNI to see
if it is worth buying.
9) I ran the OMNI update just after loading 8 disks ; loading the
update
may be a requirement to make keygen work: I do not know.
10) I did not mount the ISOs !! Made DVD disks from the ISO files
and then installed
them from DVD drive. Mounting the ISo files seems like a poor way to
do it although
another instruction said to mount the ISO files.
11) If no go, play with what ya got, have fun
|
|