Path: news.nzbot.com!not-for-mail
From: Capt@Salvo.com (Captain Salvo)
Sender: Capt@Salvo.com
Newsgroups: alt.binaries.sounds.samples
Subject: Ownhammer.Impulse.Response.Libraries.California.Duo - [01/21] - "about.nfo" yEnc (1/1)
X-Newsposter: Easy Usenet Uploader v1.0.73 (http://members.home.nl/wantos/)
Message-ID: <221f4$585e07a0$4dfad88d$9245@abuse.newsxs.nl>
X-Complaints-To: abuse@newsxs.nl
Organization: Newsxs
Date: Sat, 24 Dec 2016 06:29:04 +0100
Lines: 46
X-Upload: Secured through NewsXS SSL
NNTP-Posting-Date: Sat, 24 Dec 2016 06:29:04 +0100
X-Received-Body-CRC: 2217371297
X-Received-Bytes: 6392
Xref: news.nzbot.com alt.binaries.sounds.samples:1323
about.nfo
CABINETS AND SPEAKERS
SINGLE CABS SPEAKER BLENDS
In the 212 3QTR and 412 TRAD sections, each of the cabinets contains mixes of two speakers for all available permutations of speaker types within that enclosure. The naming convention is an indication of sonic characteristics regarding the way they are combined and is as follows:
CAB BLENDS
In the Cab Blends section, cabinets are mixed together in complimentary pairs using the same naming convention type as the single cabs section:
SUMMARY
THE MICS AND MIC MIXES
In this library, the speaker cabinet was sampled with many microphones and capture types.
For microphones with position numbers 00 through 10, these positions represent movement across the face of the speaker along the relative sweet spot from brighter and closer to center (00) to darker and further out on the cap or cone (10). These numbers do not represent any specific unit of measure and are merely sequential arbitrary definitions.
Below are explanations of the mic models and pre-made mix types:
MICS
MIXES
QUICK START CONTENTS
The Quick Start folder contains the OwnHammer picks for the most universally ideal single mic and mix positions. Though your mileage may vary, this is a great starting point to get an idea of the overall sound of the cab, speaker, mics, and mixes, and discovering which options you may wish to explore further in the auditioning process.
MID BOOST FILES
Wave audio format IR's (.wav) are compatible with convolution reverb type loaders in recording software and outboard hardware units and are provided in:
24 bit resolution
44.1, 48, 88.2, and 96 kHz sample rates
mono channel count
minimum phase transformed ("Mpt") and non-minimum phase transformed
200 and 500 ms decay tail lengths
For added convenience, .wav files appropriate for conversion or submission to the following platforms have been separated out and designated within the library structure:
Atomic Amplifire
Fractal Audio Systems hardware/software
Kemper Profiling Amp
Line 6 Helix
Two Notes hardware
KNOW YOUR PLATFORM'S FILE FORMAT!
THIS LIBRARY CONTAINS .WAV FORMAT FILES ONLY.
home page
ownhammer.com/store/
|
|