Path: news.nzbot.com!not-for-mail
From: "|--Spike=-" <|--Spike=-@Home.Co.UK>
Newsgroups: alt.binaries.documentaries
Subject: Re: New Blu-Ray Drive Problems...
Message-ID: <jttjvat0raqf9d6t541sciakb25u1o38gl@4ax.com>
References: <l7tjvalv8ppi8n2entda7kt915d06fli96@4ax.com>
X-Newsreader: Forte Agent 6.00/32.1186
X-No-Archive: yes
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 58
X-Complaints-To: abuse@tweaknews.nl
NNTP-Posting-Date: Wed, 16 Sep 2015 23:20:14 UTC
Organization: Tweaknews
Date: Thu, 17 Sep 2015 00:20:17 +0100
X-Received-Body-CRC: 3671120504
X-Received-Bytes: 2945
Xref: news.nzbot.com alt.binaries.documentaries:4434
On Thu, 17 Sep 2015 00:04:39 +0100, "|--Spike=-"
<|--Spike=-@Home.Co.UK> wrote:
>Well... I installed the new drive and everything seemed great until I
>tried burning some stuff... I have created 3 coasters so far :|
>At 90p for each coaster and only 7 attempts left... anyone got any
>idea's ?
>
>Some system info...
>Windows 7 Ultimate / Service Pack 1 (64 Bit)
>Intel Core 2 Quad CPU / 2.40GHz
>6GB RAM
>
>TDK BD-R 25GB Recordable Blu-Ray discs used
>
>Device Manager shows the correct...
>LG WH14NS40 Drive
>
>The drive reads my old Archived Data DVD's fine.
>
>Using Nero 64 portable version, the bare bones cut down version that
>doesn't install itself into Windows... just a stand-alone burner.
>It has burned 1000s of DVDs trouble free over the years (with my older
>drive).
>
>The new drive attempts to burn but exits as soon as it tries.
>Using the lowest burn speed available (x4)
>Have tried on UDF and ISO options.
>
>I have also tried the Windows 7 Ultimate (built-In) burn files to CD
>option... same result, exits straight away = coaster number 4.
>It told me to check that the Firmware was up to date.
>
>I'm not too sure about updating Firmware... its irreversible, I have
>tried it once before on a New Motherboard that I fitted and it had Bad
>Effects for the Windows XP drive that I had on one of my HDDs.
>(it started to run really slow after the Firmware was updated)
>
>Any ideas anyone ?
>
====================================================
I have also tried burning after disabling ALL other running programmes
to make sure that the system has the maximum memory and resources that
my system has... same result ! Immediate coaster.
The drive is also recognized and selected as the Primary DVD drive in
the BIOS.
*******************************************************
* If The Earth Didn't Suck... We Would All Fall Off ! *
*******************************************************
|--Spike=-
|
|