alt.binaries.crafts.picturesPrev. Next
Re: Scanning info requested from CrazyQuilter
lotsafabric (notthis@notthat.com) 2009/05/22 21:02

Path: news.nzbot.com!spool1.sonic-news.com!news-out.sonic-news.com!not.news-service.com!not.alt.net!not.highwinds-media.com!news.astraweb.com!border5.newsrouter.astraweb.com!indigo.octanews.net!news-out.octanews.net!teal.octanews.net!nx02.iad01.newshosting.com!209.197.12.242.MISMATCH!nx01.iad01.newshosting.com!newshosting.com!216.196.98.140.MISMATCH!border1.nntp.dca.giganews.com!border2.nntp.dca.giganews.com!nntp.giganews.com!backlog2.nntp.dca.giganews.com!nntp.posted.oipradius!news.posted.oipradius.POSTED!not-for-mail
NNTP-Posting-Date: Fri, 22 May 2009 22:02:07 -0500
From: lotsafabric <notthis@notthat.com>
Newsgroups: alt.binaries.crafts.pictures
Subject: Re: Scanning info requested from CrazyQuilter
Date: Fri, 22 May 2009 20:02:00 -0700
Message-ID: <u9pe15d59qemiq47ios6ljib0kecgbkb4f@4ax.com>
References: <GOZFl.173148$Yx2.65061@en-nntp-06.dc1.easynews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 10
X-Usenet-Provider: http://www.giganews.com
NNTP-Posting-Host: 97.125.15.97
X-Trace: sv3-ThvZrfkQhP33LmIKh6H3FDPRp+pd/T7bYFjhUyB3x9UArKyPxurvjPTSjiGH0hfeNs2c47eQFpgjH7X!m9Yrn2lGFhvuqvXOm79GwLm+qByHXFvtLa6MRkLMK4uG8oRMkpqLHisJUG3+6A5UGe9CEsM3/RVg!QVEySzaM6dbR4pmQlrQ=
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.39
X-Original-Bytes: 1643
Xref: news.nzbot.com alt.binaries.crafts.pictures:6731

I noticed you scanned using 11x17 area.  What scanner do you use? What
dpi is acceptable to you?
All of my scanners have a max of 8-1/2 x 14 inches and would like to
get a large format scanner for some of my applique patterns..
There are even some sheet feed large formats that go pretty cheap on
ebay used.  would like the advantage of scanning a whole book...
any ideas?
What software are you using with it?  Currently I put multiple areas
together using an older copy of corel draw and then save the completed
complation as jpg.

Next Prev. Article List         Favorite