People have been warned about the viruses in these things.
Some scanners will not even identify these.
I hope you have another machine just in case. The noise level here is not to
be trusted. Even his name changes everyday as he is being chased all over
the Internet by those wanting his arrogant ass.
--------------
"danny" wrote in message news:ofpgt6922foml7286oqodhcbu2todks0h7@4ax.com...
Mallet,
I found the location. Thanks, Which program do you recommemd?
5 or tool?
Danny
On Sun, 22 May 2011 02:26:20 +1000, mallet <lacrosse @abcp.invalid>
wrote:
>danny@home.net wrote:
>>Sorry about last post. I don't think I was Following the correct
>>procedure for getting help on a design.
>>
>I carnt say there is a "correct procedure", Danny.. in
>as much as if the file is posted so it gets to all servers
>that is the end of that. The rest is maybe just "common
>courtesy", accompanied by as much information in
>regard to what is expected of the design. All that done,
>there can be no guarantee the work will actually
>produce anything.. as I see the whole of the matter :-)
>
>> I work in a calibration lab in south Alabama, they are six of us and
>>we was hoping to get this logo digitized so we can have them put on
>>polo shirts. My wife has a Brothers PE- 770 Embroidery Machine, but we
>>do not have software to digitized Designs.
>>
>The lack of software can be 'adjusted', if you so
>wish, Danny ;->
>I just the other day had cause to go look over in
><abdmc> to find there is selection of digitising
>programs sitting there... for the picking.
>Look for anything by "Postal Pete".
>
>>I am attaching the logo in two .jpg sizes.
>>
>I see that, saw it in the first upload.. good
>clean graphics, Danny... visually.
>
>>I need it to be about a 3 inch X 4 inch to go on the left side of the
>>shirt. There are no pockets on the shirts.
>>
>So that is 3 inches wide by 4 inches high?
>
>>Thank you guys for your help.
>>and again I'm sorry if I haven't followed the correct procedure.
>>
>>Danny
>>
>Just so I know you know, Danny?
>Maybe you are reading particular comment,
>comment I would urge you to disregard as
>"good information" on any procedure.
>There is one single individual hell bent on
>making trouble in this NG. "Sucker-punch"
>is his best effort, troll up a 'sucker', give
>out a virtually impossible job then disappear
>"poof" when the work IS produced, or a
>question asked of the 'requestor'.
>
>I am not going to pull any punches here, Danny.
>You are driving Agent V5.
>Two swift clicks on any of these Mids will
>retrieve posts from a thread supported _only_
>by him.
>No other poster in ABCP has posted to that
>thread, despite what you may find, and
>read, different.
>mid: <w1Ddp.120967$4c7.46154@newsfe06.iad>
>mid: <Yqsegp.30f5n19Pg4.17362@newsfe22.iad>
>mid: <AYofp.4801$0O1.846@newsfe01.iad>
>mid: <wdpfp.1530$uN1.567@newsfe04.iad>
>mid: <hEtip.18$iz3.9@newsfe04.iad>
>mid: <AGtip.2$%a6.0@newsfe03.iad>
>mid: <0QFlp.26273$tL6.18895@newsfe03.iad>
>mid: <dximp.4702$tC3.1896@newsfe01.iad>
>mid: <rpVvp.13869$rB2.3752@newsfe21.iad>
>mid: <RdOop.2620$7N3.53@newsfe10.iad>
>mid: <oNHrp.485$I64.413@newsfe04.iad>
>mid: <JZeup.47595$0s5.4097@newsfe17.iad>
>mid: <Yqsegp.30f5n19Pg4.17362@newsfe22.iad>
>mid: <x2zup.14503$Ot6.12291@newsfe15.iad>
>mid: <d8nxp.21453$Vp.3863@newsfe14.iad>
>mid: <cr%yp.27334$Vp.4317@newsfe14.iad>
>mid: <Yqsegp.30f5n19Pg4.17362@newsfe22.iad>
>
>So now you know. The idiot is quite easy to spot.
>
>To your request?
>I have had a look at it earlier today.. not long after
>your first post. The good news is I was interested
>enough to just have a play with it. The bad news is
>there is a lot of fine detail Danny, I doubt any of
>that detail can be replicated easily, in stitches.
>You may just have to trust what is done by the
>digitiser, in selecting what makes up the "art"?
>Certainly this job would not make it through
>"auto-digitising".
>Okay.. what does that mean for you?
>Time.. time Danny, and review.
>You are going to have to help with the project to
>get what you want. Nobody can do
>"whacko..!.. here you are".
>That's the deal.. from my end.
>OMMV
>
>To illustrate what I point to?
>So far we have had .. in recent months.
>"my friend's kid has leukemia"
>"my daughter is penniless after the GFC"
>"i am bwian damiaged and neeed hilp[sic]"
>
>ALL of those were a complete and utter
>waste of time, for ABCP and for the
>people sparing their time and skills to assist.
>
>Let's not have to add.. "I am a 'Bama polo
>playing boy with a wife".. to that list.
>Most of us have wives or husbands, some
>have both.. it is that kind of World, on Usenet.
>
>cheers
|
| Follow-ups: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |
|