alt.binaries.crafts.picturesPrev. Next
Re: Pink Ribbon Request - Pink Ribbon Flake.rar (0/3) Shemes
scissorhands (WayOutThere@home.com) 2010/12/30 08:13

Path: news.nzbot.com!spool1.sonic-news.com!news-out.sonic-news.com!not.news-service.com!not.alt.net!not.highwinds-media.com!dr6!artnm!sb11!172.24.8.122.MISMATCH!feeder3!feeder.news-service.com!cyclone02.ams2.highwinds-media.com!news.highwinds-media.com!npeersf01.ams.highwinds-media.com!newsfe05.ams2.POSTED!4703a4d1!not-for-mail
From: scissorhands <WayOutThere@home.com>
Newsgroups: alt.binaries.crafts.pictures
Subject: Re: Pink Ribbon Request - Pink Ribbon Flake.rar (0/3)
Reply-To: none@net.invalid
Message-ID: <jo7ph61sfrs8vgr686618gm18is4ah3rin@4ax.com>
References: <4d112afb$0$29971$c3e8da3$5496439d@news.astraweb.com>
X-Newsreader: Forte Agent 2.0/32.652
X-No-Archive: yes
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 17
X-Complaints-To: http://support.highwinds-media.com
NNTP-Posting-Date: Thu, 30 Dec 2010 15:13:31 UTC
Organization: Shemes
Date: Thu, 30 Dec 2010 10:13:26 -0500
Xref: news.nzbot.com alt.binaries.crafts.pictures:17365

On Wed, 22 Dec 2010 09:32:21 +1100, "Callie" <callie@internode.on.net>
wrote in:
<4d112afb$0$29971$c3e8da3$5496439d@news.astraweb.com>:

>Hello, does anyone have any breast cancer awareness designs to share please.
I tried this but I had some problems.  The instructions are not very good.
The snowflake came out very floppy with just the mylar.  I used 2 pieces of
mylar so that it looked the same front and back.  It definitely needs some
heavier stabilizer behind it, maybe sandwiched in between.  Unfortunately,
it doesn't come with a separate die line pattern to cut it out first, so I
think trying to cut stabilizer in the hoop as you would cut reg fabric for
applique will be difficult.  I haven't tried this yet though so I can't say
for sure.  But I know that when I finished these with just the method
described in the directions, the snowflakes curled.  They were not
something that would work for an ornament on the tree with the results I
got the first try.  Good Luck, and if you find a method that works will you
please let me know so I can try them again?  Thanks.

Follow-ups:123456
Next Prev. Article List         Favorite