[supplementary]
Seeing as how "Lady DII" was just another sockpuppet of
one prankster in ABCP, I repost this info for "Me Me" <who@where.com.
No doubt the message got lost in the noise.
[original content follows]
"Me Me" <who@where.com wrote:
>
[top post corrected]
>
>>>>"LadyDII" <dmilesfay@gmail.com wrote in message
>>>>news:vnzHJJHuqw9i7C9Jdmilesfay@gmail.com...
>>>> PE Design 3 uses a dongle. I am unaware of anyway to bypass not having
>>>> it
>>>
>>> Herb:
>>> These manuals should help.
>>>
>>>
>>> http://pub.brother.com/pub/com/home-sewing/newsolution/dl/PE-DESIGNV25.pdf
>>> http://www.brother-usa.com/HomeSewing/software/csbk_3.pdf
>>>
>I am aware that it is dongle protected. I have lost my disks and need to
>re-install after a hardrive crash.
>The serial number on the back of my reader is "F xxx1112x"
>The "x " is just to protect my identity.
>Thanks is advance and also thanks to herb fot the fresh breath of
>sarcasm....
Herb likely misread your post.. from YOUR "point of
view"??
You get that (happening) when you BANNER POST :-}
To avoid such misunderstanding AND get your post read
by EVERYONE you MUST place content (your message)
IN THE BODY
of the post, as you have done on this occasion, in
posting YOUR misunderstanding.
Get it?
No, I didn't think so.
Perhaps were you to take the time to actually READ some
instruction the answers would become apparent?
What works as advice here in ABCP works
anywhere.. on Usenet.
To your dilemma?
PE3 seems to have disappeared from my archives.
I can only put that down to the fact of having kept
only PE5
I must have decided PE5 was over PE3 in performance.
PE5 is posted here:
alt.binaries.dominion.moms.computer
Subject: making it happen
with-"TimelyStitchez.rar" (0/6) yEnc
Message-ID: <ZHPlo.6481$D67.5898@newsfe01.iad
~enjoy.
--
hopper
|
| Follow-ups: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
|