Path: news.nzbot.com!not-for-mail
From: Observer <Guess@None.com>
Newsgroups: alt.binaries.tvshows
Subject: Re: ping pcz.
X-Newsreader: NewsLeecher v7.0 Final (http://www.newsleecher.com)
References: <%AHJB.117647$HV1.63700@fx33.am4>
Lines: 65
Message-ID: <A7aPB.2060$bV.1638@fx28.iad>
X-Complaints-To: http://www.newsleecher.com/support/
NNTP-Posting-Date: Thu, 16 Nov 2017 06:21:20 UTC
Date: Thu, 16 Nov 2017 06:21:20 GMT
X-Received-Bytes: 2293
X-Received-Body-CRC: 3483547316
Xref: news.nzbot.com alt.binaries.tvshows:5285
Thanks again for all your posts!
I've installed StaxRip.
If you have any setting suggestions for getting the smaller files out of StaxRip
(I see some great encodes under 500MB) I would sure welcome them.
Thanks again!
In reply to "**PCZ**" who wrote the following:
> In reply to "a@b.com" who wrote the following:
>
> > i dled season 12 of supernatural in 1080p which is over 20 gigs. i want to
> > have
> > a go at converting it to x265 and posting it to save brad or yourself the
> > bother.
> >
> > what is the best app to do it and what settings would i need? handbrake was
> > suggested on one web page, howether they recommended win x hd deluxe.
> >
> > you obviously know what you are doing, so i'll happily take any advice you
> > can
> > give me.
> >
> >
> > --
> > ----------------------------------------- --- -- -
> > Posted with NewsLeecher v7.0 Final
> > Free Newsreader @ http://www.newsleecher.com/
> > ------------------------------- ----- ---- -- -
>
> Just spotted your post.
> I use a few apps dependent on what i want to do.
>
> You can use Handbrake or one of the re skinned clones.
> However i would say this isn't your best choice for doing a whole season.
> I use it for one offs and small batches.
> It lacks 10bit support in the standard versions, can be enabled by downloading
> nightlys and adding DLLs.
>
> I would download StaxRip-x64
> It is free.
>
> You will be encoding on the CPU i guess.
> It is a slow process be warned.
> I can give you the settings i use and maybe a preset but it is pretty much
> defaults in the x265 profile anyways.
>
> install StaxRip-x64
> Get the episodes you want to encode in a folder of there own.
>
> respond and i will continue with settings and maybe a picture.
>
|
|