On Thu, 17 Dec 2009 11:18:57 -0800, Herb <Herb@the.herb.garden> wrote:
>snowedinscfan@goalpost.com wrote:
>
>> On Wed, 16 Dec 2009 17:39:51 -0800, Herb <Herb@the.herb.garden> wrote:
>>
>>
>>>scfan@goalpost.com wrote:
>>>
>>>
>>>>On Wed, 16 Dec 2009 15:17:34 -0800, Herb <Herb@the.herb.garden> wrote:
>>>>
>>>>
>>>>
>>>>>scfan@goalpost.com wrote:
>>>>>
>>>>>
>>>>>
>>>>>>I am hoping someone will digitize the South Caralona Gamecock logo. I
>>>>>>purchased eps art hoping that will help ensure a more professional
>>>>>>sew-out. I would lilke to sew this on a gift for a person very
>>>>>>special to me. Please just let me know if there's a charge.
>>>>>>
>>>>>>Thank you for considering my request.
>>>>>
>>>>>Here are a few. I posted this about 4 hours ago, but Easynews seems
>>>>>to be having hiccups and missed it.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>Thank you, Herb. I had some of the older designs but the sew out
>>>>wasn't great. The newer ones are better, but I'm hoping for a little
>>>>more detail. The original logo is difficult enough to recognize as a
>>>>gamecock, so I think I need to try for more definition. I'm attaching
>>>>the eps file this time.
>>>>
>>>>BTW, not even my original post shows on giganews. Guess the whole
>>>>system burped 8~)
>>>
>>>I just looked at the designs I sent, and they do seem to be pretty awful!
>>>
>>>What size finished design are you looking for? There's a lot of detail
>>>there, particularly in the head, much of which WILL get lost at small
>>>sizes. I've attached one that's a little smaller than 5"x7". It's not
>>>usable as is, but I'd like your opinion on some specifics. E.g.:
>>>
>>>Overall, in general, is this adequate quality? Small specifics are
>>>probably fixable.
>>>
>>>Do you want the white outlines that are inside the "C" stitched or
>>>open as they are in the attached sample? I think that stitched would
>>>look better, but might also look strange because the outline doesn't
>>>continue around the whole bird.
>>>
>>>Do you want the TM?
>>>
>>>The black outlines need work around the beak and a couple of the
>>>flying feathers.
>>>
>>>And anything else you can think of!
>>>
>>> - Herb
>>
>>
>>
>> I'm hoping to get the design in 2 sizes, if possible. I'm looking for
>> left chest logo size & bigger for across the front of a sweatshirt. I
>> have a Singer XL 1000, so I'm lilmited to on hoop size to some degree
>> for the full chest sweatshirt. I hope that makes sense. Oh, I can
>> resize some...
>>
>> Re the white outline in the C. I'm attaching a picture of the logo on
>> a black shirt & it appears the white outline does go around the whole
>> bird. Is that a problem?
>>
>> I would like the TM--I can cut from the design if not needed.
>>
>> I hope I've answered all your questions except my over opinion which
>> is WOW & thank you.
>>
>> scfan
>>
>>
>
>Errr. What two sizes? In inches or millimeters, please. A large design
>can be made to work in a smaller hoop (requiring re-hooping and
>re-aligning).
>
>The whole white border makes sense, but can't be done from the image
>you posted. Note that there's no differentiation between the
>background and where the white outline would be. However, I did find a
>good image of just the gamecock, with the outline. Should be able to
>merge the two. (the big JPG of the gamecock is attached for your
>interest
I'm really just guessing here, but for the left chest, about 3.25
inches wide. For full center chest, maybe about 8 inches wide--. I
would just resize but I've been told resizing (increase or decrease)
can ruin the design. Your input is appreciated. If 2 sizes is too
much work, I would be grateful for the smaller one only.
If you can merge the files, that would be great.
Terry
>
|
|
 - sc on black shirt.jpg (0/1)')){kind=link}